Free Tool

SWMS Compliance Checker

Audit your existing SWMS against 12 key compliance requirements. Get an instant compliance score and see what needs fixing.

Audit your Safe Work Method Statement against 12 key requirements. Check each item that your SWMS includes.

Compliance score0/12 (0%)

1. HRCW categories identified

The SWMS identifies which of the 19 high-risk construction work categories apply to the work.

2. Hazards specific to the site

Hazards have been identified based on the actual site conditions, not just generic risks.

3. Risk assessment with before/after controls

A risk assessment shows inherent risk (before controls) and residual risk (after controls).

4. Controls ranked by hierarchy level

Control measures follow the hierarchy: elimination, substitution, engineering, administrative, PPE.

5. PPE with Australian Standards references

PPE requirements cite the applicable Australian Standard (e.g. AS/NZS 1715 for RPE, AS/NZS 1337.1 for eye protection).

6. Workers consulted during preparation

Workers who will carry out the HRCW were consulted during the preparation of the SWMS.

7. Workers signed on before starting work

All workers have signed the SWMS before commencing the high-risk construction work.

8. Review date set

The SWMS includes a scheduled review date and specifies triggers for earlier review.

9. Emergency contacts and procedures

Emergency contacts, first aid provisions, and emergency procedures are documented.

10. Plant and equipment listed

All plant, equipment, and tools required for the work are listed with maintenance status.

11. Legislation and codes referenced

Applicable WHS legislation, regulations, and codes of practice are referenced.

12. Kept on site and accessible

The SWMS is kept at the workplace and is readily accessible to workers and inspectors.

This tool provides general guidance only. It is not legal advice. Consult the WHS Regulation 2025 for definitive SWMS requirements.

Access the full suite of compliance tools.

Every tool, every module, every register. See EHS Atlas with your industry data loaded. 30 minutes. No obligation.